Estimatorly calculators
Fence Calculator
Start with the fence line, choose a material, add gates, and select flat or sloped terrain. This generic fence calculator compares posts, panels or sections, and material cost across common fence types; the child calculators below go deeper into each material and project detail.
TBD — verify by gate type and width
TBD — verify 2026
TBD — verify 2026
TBD — verify 2026
TBD — verify 2026
TBD — verify 2026
Show the math
Posts = ceil(150.0 ÷ 8) + 1 + gates = 21
Panels/sections = ceil(150.0 ÷ 8) = 19
Each material cost = linear feet × its editable rate, adjusted for terrain and gate allowance
Selected total = 0 – 0
Available now
Live calculators
Wood Fence Cost Calculator
Estimate wood fence posts, pickets, materials, installation, gates, and tear-out.
Chain Link Fence Cost Calculator
Estimate chain-link fence posts, mesh rolls, top rail, labor, and cost per foot.
Vinyl Fence Cost Estimator
Estimate vinyl fence panels, posts, and installation.
Fence Stain Calculator
Estimate fence stain gallons from length and sides.
Fence Pickets Calculator
Count fence pickets from linear feet, width, gaps, and waste.
Split Rail Fence Cost Calculator
Estimate split-rail posts, rails, mesh backing, labor, and cost per foot.
Field Fence Calculator — Rolls, T-Posts & Clips
Estimate field fence rolls, T-posts, clips, and materials cost.
Aluminum Fence Cost Calculator
Estimate aluminum fence panels, posts, gates, labor, and cost per foot.
How this fence calculator works
Measure the fence line, choose a type, enter the editable rate for each material, add gates, and choose flat or sloped terrain. The tool compares the material categories without pretending that one national rate fits every property.
The six child pages below go deeper into material-specific quantities, installation, stain, farm fence, and concrete post work.
How to measure your yard
Measure each straight segment with a tape, wheel, or plan. Add the segments, subtract house or garage spans that are not fenced, and mark corners, ends, and gates. A survey or property plan may be needed where the line is uncertain.
Slope, retaining walls, trees, utilities, and access can change installation scope.
Fence types compared
Wood, vinyl, chain-link, aluminum, and split rail have different privacy, maintenance, appearance, and installation characteristics. The comparison table uses the rates you enter; 2026 national ranges are TBD — verify.
Use the child page for the type you are seriously considering before ordering materials.
What drives fence cost
Linear footage is only the first variable. Gates, terrain, tear-out, corners, difficult access, permits, setbacks, easements, and local labor can move the quote. Ask for those items separately.
Methodology and assumptions
Posts use 8-ft planning spacing plus one, panels or sections use 8-ft planning length, and each selected rate is multiplied by linear feet. Gates use the allowance entered above. This is a planning estimate, not a survey, code review, or contractor quote.
Common questions
Frequently asked questions
How does a fence calculator work?
Enter linear feet and material rates. The calculator estimates posts at 8-ft spacing, panels or sections, gates, and a material comparison; child pages add material-specific detail.
What is the difference between a fence estimator and a fence calculator?
They are different names for the same planning job here: turning a measured fence line and material assumptions into counts and cost estimates.
How do I calculate fence panels needed?
Divide linear feet by the actual panel length, usually 8 ft, and round up. Gate openings, corners, end posts, and the manufacturer’s panel width can change the final takeoff.
How many linear feet of fence do I need?
Walk the property line, measure each segment, add the segments, and subtract spans where the house or garage forms the boundary. Include gate locations in the plan.
Which fence type is cheapest?
Chain-link is often the lowest material category, followed by wood, vinyl, or aluminum in many markets, but 2026 rates are TBD — verify and compare the page table.
Does the calculator include gates?
Yes. Enter the gate count and an editable gate allowance. Gate width, hardware, posts, and installation can change the actual quote.