Driveway · updated 2026
Asphalt Millings Calculator
Recycled asphalt millings are not the same material as hot-mix asphalt. This asphalt millings calculator converts driveway length, width, and compacted depth into cubic yards and tons using a density input, then adds an editable material price and optional delivery fee. Density and millings prices are TBD — verify with the recycler, paving company, or quarry.
TBD — verify loose or compacted density with the supplier
TBD — verify pickup or delivered price
TBD — enter supplier delivery fee
Show the math
Volume = 40 × 12 × (4 ÷ 12) = 160.0 cu ft = 5.93 yd³
Tons = 160.0 × 130.0 lb/cu ft ÷ 2,000 = 10.40
Coverage = 40 × 12 ÷ 10.40 = 46.15 sq ft per ton
Total = material cost + delivery = 0
What asphalt millings are
Millings are reclaimed asphalt material produced when an existing paved surface is removed or resurfaced. They can be a lower-cost driveway surface than new hot mix, but they need a prepared base, drainage, spreading, and compaction.
Do not substitute hot-mix density, hot-mix plant pricing, or hot-mix installation assumptions without checking the material.
How to use the calculator
Enter driveway length, width, and compacted depth. Then enter the density and price from the supplier. The calculator separates cubic yards, tons, material cost, delivery, total, and coverage so each assumption can be checked.
If the supplier quotes loose tons instead of compacted tons, ask how much additional material they recommend for rolling and settlement.
Millings versus gravel and new asphalt
Gravel, millings, and new hot-mix asphalt have different installation requirements and finished surfaces. Gravel depends on aggregate layers and grading; millings need rolling and can bind; hot mix requires paving equipment and temperature control.
A comparison is only useful when the base preparation, drainage, edge work, and delivery scope are the same.
Depth and compaction
The entered depth is the compacted depth for the volume calculation. Place material in workable lifts and compact according to the installer’s equipment and the material source. A single deep lift can leave loose material below the surface.
Soft subgrade and standing water are site issues, not errors the tonnage calculator can solve.
Price and delivery
Millings prices are TBD — verify. Pickup and delivered quotes can differ substantially, and some suppliers use minimum loads or charge separately for placement and spreading.
Enter delivery as a separate fee when you have it. Compare the complete delivered scope rather than only the per-ton line.
Methodology and assumptions
The calculator multiplies the footprint by depth, converts cubic feet to cubic yards, converts volume to tons using the entered density, and adds the optional delivery fee. It does not design the base or guarantee compaction performance.
What the numbers mean
The calculator converts your measurements into a practical purchase quantity using a documented coverage or spacing assumption.
Any whole-unit quantity is rounded up so the result does not leave you short during the project.
Use the cost range as a planning baseline and confirm the final quantity, availability, and delivery charge with your local supplier.
2026 material prices
Material, labor, coverage, and density defaults are TBD — verify with your local supplier or manufacturer before ordering. 2026 U.S. national averages. Prices vary by region and retailer — confirm locally before buying.
Pro tips
- Millings compact and bind differently from hot-mix asphalt; do not use a hot-mix density or price without checking the material.
- Spread in lifts and compact each lift with suitable equipment. A thick, unrolled dump can remain loose below the surface.
- A crown and edge restraint help direct water and limit migration at the driveway edges.
- Ask whether the quoted tons are loose, compacted, pickup, or delivered quantities.
- Sealcoat or emulsion options are separate from the millings material total and are TBD — verify.
- The coverage line is a check for your entered depth, not a promise of final performance.
Common questions
Frequently asked questions
How do I calculate asphalt millings needed?
Multiply area by depth to get cubic feet, divide by 27 for cubic yards, then multiply by the verified millings density and divide by 2,000 for tons. Add delivery separately.
Is there a difference between an asphalt milling calculator and a millings calculator?
No. “Milling” and “millings” are commonly used for the same recycled asphalt material in this context. The important distinction is millings versus new hot-mix asphalt.
How much does a ton of asphalt cover?
For millings, roughly 80–100 square feet at 2 inches is a planning check, but density changes the answer. This calculator prints coverage for your exact depth and density.
How much is 1 ton of asphalt millings?
The 2026 price is TBD — verify because pickup, delivery, region, order size, and source change the quote. Enter the supplier’s price per ton above.
Do asphalt millings harden like pavement?
They can compact and bind in warm conditions, but they do not equal new hot-mix pavement. Rolling, drainage, edge restraint, and optional sealcoat affect the finished surface.
How long does a millings driveway last?
A maintained millings driveway can last many years, but a universal lifespan is not guaranteed. Regrading, drainage, compaction, traffic, and maintenance determine the result.
Related calculators
Planning estimates only. Prices are 2026 U.S. national averages and vary by region — confirm with your local supplier before buying.